Rotten Fascia Behind Gutters: Identify the Roof-edge Timber
The fascia runs along the gutter edge, a bargeboard follows the sloping gable edge, and the eaves lining is underneath the overhang. Tell us which part is affected. We check peeling paint, soft ends, open joints, warping or a gutter pulling away against the condition of the board and its fixing base.
We inspect the accessible ends, edges, joints and fixing positions before deciding what can remain. A sound-looking face can conceal deteriorated timber or an unreliable connection. Unknown old eaves linings need material identification before disturbance; asbestos removal is outside this timber repair service.
Local Fascia Repair or Section and Full-board Replacement
The repair extent follows the remaining sound material, suitable fixing positions and the position of joints. MEL ONE can carry out local repair, replace an agreed damaged section or replace a full board where appropriate. A small paint defect and a decayed board end may need very different work.
Before ordering replacement timber, we measure the board's width, thickness and profile and check where sound timber can receive the fixings. We agree the section joints, corner and end details with you, then record the proposed match and finishing area in the quote.
Assess local timber decay before replacement · Email fascia photos (optional)
Behind the Board: Fixing Battens and Roof Structure
Removing agreed damaged boards and fixings allows the exposed base to be checked before new timber is fitted. Confirmed non-load-bearing fixing-batten repairs can be included in the carpentry scope. The condition of that base matters because a replacement board still needs suitable material to receive its fixings.
Deteriorated rafter tails or other load-bearing roof members need separate professional assessment, design and an agreed structural scope. They are not automatically included in a fascia quote. If removal exposes more damage than the initial assessment showed, document the finding and agree the revised work before proceeding.
Gutters, Flashing and Timber-end Protection
A leaking gutter or failed flashing can return repaired timber to the same wet conditions. We agree who will assess and remedy the cause of wetting, and coordinate that work before closing up or coating the repaired timber. Gutter, flashing, roof-covering and weatherproofing work remain separately scoped interfaces, including any removal or reinstatement needed for access.
Agree timber-end protection, primer, spot painting and any full recoat as distinct finishing items. The selected timber and coating system guide the preparation, while retained weathered surfaces may remain visibly different. If a painter is already arranged, coordinate the handover condition and timing with that work.
Fascia Repair Quote: Boards, Access and Coating
We agree which fascia, bargeboard or timber eaves sections need repair or replacement, their thickness, width and profile, and the fixing-base work. Local repairs and full-board replacement are priced against the condition found and the matching detail, rather than damaged-board length alone.
Access and removal: we discuss access equipment, protection, removal, waste and who removes or reinstates adjoining gutter components. Gutters, flashing, hidden leaks and load-bearing roof repairs need separately assessed and assigned work.
Coating and handover: we confirm timber-end protection, primer, spot painting or a full recoat as included or separately arranged items. At handover, we review the fitted timber and record remaining gutter or painting work. Newly exposed damage needs an agreed repair and price before the work extends.
Fascia Replacement, Hidden Damage and Coating Questions
Does peeling fascia paint mean the whole board needs replacing?
Peeling paint alone does not establish the repair extent. MEL ONE checks timber condition, board ends, joints, fixings and the adjoining base before comparing local repair, section replacement and full-board replacement. Painting and timber replacement are specified separately, so the quote explains both the repair and the intended finish.
What happens if damaged timber is found behind the fascia?
The exposed fixing base is assessed before a replacement board is fitted. Repair of a confirmed non-load-bearing fixing batten can be included in the carpentry scope. Deteriorated rafter tails or roof structure need separate professional assessment and an agreed structural scope; they are not assumed to be covered by a fascia-board quote.
Are gutter repairs and a full repaint included?
Only when expressly included in the written scope. Gutters and flashing require their own work arrangements, while timber-end protection, primer, spot painting and a full recoat are separately quoted options. Confirming these items before booking helps coordinate the carpenter, painter and any relevant roof or gutter trade. Unknown old eaves linings need identification before disturbance; do not cut, drill or sand suspected asbestos materials. Asbestos removal is outside this timber repair service.